LCD splicing screen is a kind of large screen product with high performance and cost performance. It is widely used in monitoring system, conference system, information display and other scenes in various industries. In the past, only a 55 inch or 60 Inch display screen was used to monitor multiple regions. But now, with the appearance of LCD splicing screen in popularity, businesses that need to do monitoring see its advantages LCD splicing screen products to improve, for the business to improve the monitoring efficiency, small to summarize the monitoring network matrix problem.
1. How to set up patrol and patrol
Right click - login - video management - select specific screen - drag device IP - click scene - sequence click plan number - set time at the bottom left - save; save several more plans, and click round patrol to start patrol. Overview of network matrix in LCD splicing screen system
2. Why is the front screen not displayed on the display end?
① Enter the video management, select the screen first, then the screen can be segmented, and then drag IP into a single screen.
② Enter the system menu, click "IPC information management", search and add the required device IP.
③ Confirm that the front signal source is normal.
3. How to connect the control computer with the network matrix?
The control computer is connected with the matrix through a switch. After changing the IP of the control computer to a network segment of the matrix IP, open the software to search the IP of the board card of the matrix.
4. Why can't I get into the main menu?
First, check whether the mouse is connected to the USB port of the matrix, and then check whether the mouse is logged into the device.
Overview of network matrix in LCD splicing screen system
5. There is no image through the matrix?
Confirm that the front-end signal source is normal. Observe whether the network port indicator on the rear panel of the matrix is normal. If it is abnormal, check whether the network cable is damaged. If it is normal, check the software setting. If the setting is correct, consider replacing the video signal cable connected to the monitor.
6. Why does the network matrix image freeze badly?
After troubleshooting the front-end signal source, the network matrix works normally, considering that the switch and network bandwidth are insufficient.
7. How to splice?
Through the software, after selecting the screen to be spliced, drag the device IP into the selected splicing screen.
8. How to quickly judge whether the network matrix is working properly?
Check whether the network port indicator on the rear panel of the matrix is working normally (the green light is always on and the orange light is flashing).
Overview of the problems of the network matrix in the LCD splicing screen system
Network matrix is commonly used in LCD splicing screens for monitoring and security. The technical requirements are relatively large, and there are many problems. Therefore, in order to avoid unnecessary problems in the follow-up, it is necessary to choose professional personnel and high-quality Products, such as LCD splicing screens, cameras, etc.